Automatic Liquid Filling Line
   
 
Automatic High Speed Linear Bottle Washing Machine (Tunnel Type)
   

Three-cycle rinsing allows flexibilities of various wash cycles such as fresh water, dematerialized water etc. as per the rinsing requirement of bottle. All the pumps are made of SS and all the water contact parts are made of SS 316 on a heavy base of SS structure. In tunnel design is such that separation is maintained between feeding zone and discharge zone of the cleaned containers. All the mechanical drives are separated and isolated from the washing zone. Approved materials only are used for construction, together with a careful choice of components, thereby taking in to consideration all aspects of sanitation and consequence complying with the pharmaceutical G.M.P. requirements.The quality of rinsing is ensured through 3 sets of inner and 2 sets of outer nozzles accurately placed to direct the jet at center of the bottle and the bottle comes out with water totally drained with minimum droplets of water.

Salient Features

• High-pressure spray nozzles ensure perfect wash of Bottles.
• Interchangeable wash sequences.
• Totally fabricated from SS Materials, including the basic frame.
• No change parts required for washing of round bottle saving time of change over. (Change Parts require for Flat bottles & if change of neck size.)
• All parts coming in contact with washing zones / jet are made from SS 316 materials.
• The machine suitable for handling washes of round and flat glass bottle (With help of change parts).
• Water re-cycling arrangement is possible as per customer’s need.
• Machine is totally rigid and with stands continuous operation for long working. Hours without any trouble. • Higher capacity centrifugal pump to wash bigger container.
• Third Tank & pump can be fitted (optional).

Technical details

Model PEW-N-LBW-150
Out put / Hour* 9000 bottles
No. of Pocket Across 12
Tank Capacity 80 Ltrs. S.S. 316
Wash Cycle 3 Inner + 1 Outer + 1 Air
Cycle Timing 3.5 Second for each wash + 1.5 second for traveling.
Water / Air Consumptions 400 Ltrs. / Hr / Cycle /
Pressure 2.5 Kg @ 20 CFM
Machine Dimensions (In mm) 1450 x 2500 x 1550
Case Dimensions (In mm) 1900 x 3000 x 2000
Net Weight 1600 Kgs
Gross Weight 2200 Kgs
Change parts required (A) Neck Dia. Bottle holding pocket.
(B) Flat Container Size: Delivery chute.

TURN TABLE SCRAMBLER & UN-SCRAMBLER
   

Turntable is useful to ensure total synchronization, uniform flow of container and to take a turn at 90 degree to suit different machine and purpose in automatic liquid line

Stainless steel scrambler & un scrambler, which is familiar as turn table. This is built on SS square frame, solid guide rail & reduction gear box for jerk less & noiseless performance.

SALIENT FEATURES

1. Construction AISI S.S. 304 quality.
2. Three step pulley for different speed.
3. Special self-aligning bearings ensure smooth and trouble free
operation.
4. Suitable for different type of container.
5. S.S. elegantly matt finished body.
6. Reduction gears ensure jerk free and noiseless operation.

TECHNICAL SPECIFICATION

1. Direction Clockwise / Anti clock wise as per requirement
2. RPM of Disk 4/5/6 through step pully
3. Power Characteristics** 0.5 HP/415 V/50 Hz
4. Height of Disk** 860 mm to 910 mm
5. Machine Dimensions** 780 x 780 x 1160
6. Case Dimensions** 975 x 975 x 1300
7. Net Weight 150 Kgs.
8. Container size Ø 22 mm to Ø 100 mm

Automatic Rotary Piston Filling Cum Sealing Machine
   

Automatic Rotary Piston Filling Cum Sealing Machine is versatile, self-supported on stainless steel leg with height adjustable adjustment system. The machine is precision built on sturdy welded steel frame completely enclose in stainless steel sheet and doors are provided to facilitate the servicing of machine, work on volumetric principle with rotary motion. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body. No container No filling & No Sealing system arrangement is standard features of the machine.

Salient Features

• Motorized Height Adjustments.
• Automatic chain washing system for conveyor belt.
• In-built pre-inspection.
• Nitrogen Flushing.
• Cap Elevator to feed caps to the cap feeding bowl.

Technical Specifications

Model PEW-N-RFSC-4/4
Output/Hour* 1500 to 6000
Number of head/Syringe/cap 4/4
Direction of Movement** Left to Right
Fill Size*** 30 ml to 200 ml
Height of Conveyor ** 910 mm to 960 mm Adjustable.
Machine Dimensions** 3050 (L) x 1400 (W) x 2200 (H)
Case Dimensions 3250 (L) x 1600 (W) x 2400 (H)
Net Weight 2400 Kgs
Gross Weight 2950 Kgs

Online Bottle Visual Inspection Machine
   

Inspection table is used to inspect the abnormalities in filling

Inspection table is equipment consisting of a three-track conveyor with a hood with lighting arrangement and visual inspection background of alternate black & white color. Inspection table have stainless steel structure with moving S.S. slat chain. Structure made out of S. S. square pipe & supported on adjustable bolts.

Salient featuers

A/c frequency variable drive.
Direct gear drive.
Length can be made as per customer requirement.
PVC black & white board as per GMP norms.
UHMW self lubrication guide below chain.
SS elegantly matt finishing.
Adjustable height of conveyor belt, to align with
other machine of the line
Self-alignment bearing for easy maintenance.
Rigid vibration free construction for trouble free
performance

Technical specification


Direction of Movement** Left to Right
Output * Up to 100 Containers/minute
Number of Operator Four (2x2, Two Side Seated)
Power Characteristics** 0.5 HP / 220 Volts / 50 Hz.
Height of Conveyor ** 860 mm to 910 mm
Machine Dimensions** 1880 mm (L) x 700 mm (W) x 1525 mm (H)
Case Dimensions** 2150 mm (L) x 950 mm (W) x 1750 mm (H)
Net Weight 200 Kgs.
Gross Weight 425 Kgs. Approx

Automatic Measuring Dosing Cup Placement & Pressing Machine
   

Highly efficient machine with elegant look, consists of conveyor, vibrator, feed worm, container holding star plate & pressing plate.
The feed container moving on conveyor belt are feed into an In-feed star wheel through In-feed worm, star wheel bringing the sealed container below the pressing plate, mean while the sealed bottle pickup a cup from the delivery chute of bowl, where the body and the neck of the container are positioned below the pressing plate, where the pressing plate press cup gradually & performing perfect operation of cup pressing.

Salient Featuers :


• No container no cup arrangement.
• SS elegantly matt finished body Single motor synchronizes
conveyor, star wheel, & platform turret.
• Adjustable height of conveyor belt, to align with other machine of
the line.
• Specially designed hopper is provided to increase storage
capacity of bowl.
• Low noise level, low power consumptions.
• Self lubricating UHMW- PE guide profile for low friction wear
surface, smooth and noiseless conveying.
• SS cladding or hard chrome platting of all exposed parts to
ensure long life and resistance against corrosion.
• A/C drive to synchronize, Conveyor, Star wheel and Platform
turret & capping bowl.
• Universal coupling for quick and easy setting of In-feed worm

Technical Specification


Model PEW-MP-MCPP-150
Output/Hour* 3600 to 9000 Bottles
Direction of Movement Left to Right
Electrical Specification**
Main Motor
Cap Feeding Bowl
0.75 HP / 220 Volts / 50 Hz.
300 Watt Magnetic Coil
Height of Conveyor** 860 mm to 910 mm
Machine Dimension** 2135 mm (L) x 1020 mm (W) x 1800 mm
Case Dimensions 2250 mm (L) x 1150 mm (W) x 2200 mm
Net Weight 500 kgs.
Gross Weight 850 kgs

Automatic Self Adhesive Vertical Labeling Machine
   

The machine is used for full/partial wrap around labeling on different size of round containers. The Automatic Vertical Sticker Labeling Machine is one of the most users friendly. The machine is used for full/partial wrap around labeling on different size of round containers. It is capable of labeling up to 150 containers per minutes depending on products and label size. The automatic model is equipped with roller spacing device resulting in a simple operation with “No change parts required”.

Salient Featuer

High production speeds.
Stainless steel 304 construction.
GMP design.
Accurate label placement.
Full security package including counter.
Product data storage facility.
No change parts requirements.
Very less down time for change over.
Suitable for Glass, Plastic, Pet, Tin, Corrugated containers.

Technical Features


Direction of Movement Left to Right
Output/Hour* 3600 to 9000 Nos.
Electrical Specification**
Conveyor Motor 0.50 HP, 415 Volts, 50 Hz
Pressing device Motor 0.25 HP, 220 Volts, 50 Hz
Sticker Roll Servo Motor 400 W
Height of Conveyor** 860 mm to 910 mm
Machine Dimensions** 1835 mm (L) x 600 mm (W) x 1450 mm (H)
Case Dimensions 2050 mm (L) x 800 mm (W) x 1650 mm (H)
Net Weight 350 Kgs.
Gross Weight 600 Kgs

    PACKING CONVEYOR BELT
   

The conveyor belt brings the container or products from the labeling/blister/strip machine.

The packing conveyor belt is having stainless steel table top with moving endless sandwich belt in the center. Tabletop is fixed to the same structure made out of SS square pipe & supported on adjustable bolts. Tabletop is of 12 inches working space on both side of the conveyor belt for final visual inspection & packing into the box.

Specification

SALIENT FEATURES

1. Structure is made of S.S. 304, 30 mm sq. pipe, 16 SWG with matt finish.
2. A/c frequency variable drive.
3. Belt-alignment system for long life & straight running of belt. Direct gear drive.
4. Length can be made as per customer requirement.
5. S.S. elegantly matt finishing.
6. Adjustable height of conveyor belt, to align with other machine of the line
7. Self-alignment bearing for easy maintenance.8. Rigid vibration free construction for trouble free performance.

Direction of Movement Left to Right Speed** 7.5 Mtr./Min. upto 12 Feet Long 12 Mtr./Min. from 13 Feet to 24 Feet Long
Power Characteristics** 0.25 HP/220 V/50 Hz up to 12 feet long 0.5 HP/220 V/50 Hz from 13 feet to 24 feet long.
Height of Conveyor** 860 mm to 910 mm
Belt width** 9” or 12” as per requirement.
Belt Details** PVC, endless 2 ply sandwich , 2mm thickness.
Machine Dimensions**
9” width belt As per requirements (L) x 830 mm (W) x 910 mm (H)
12” width belt As per requirements (L) x 900 mm (W) x 910 mm (H)
Case Dimensions**
9” width belt As per requirements (L) x 1050 mm (W) x 1150 mm (H)
12” width belt As per requirements (L) x 1100 mm (W) x 1150 mm (H)
Net Weight Depend on Length
Gross Weight Depend on Length

    Cartoning machine PEW LP CRM
   

The efficient way for Pahrma Cartoning. Semi Automatic Cartooning Machine (box folding-Filling- Packing) It is Specially design to automatic pack small Quantities’ multi size box.With low cost and only require small area. It is suitable for Various size of box. The machine is a vertical type with multiple Function and require a short time to change mould. The machine has long service life and easily clean. Product automatic Drop into box via star wheel and conveyor.

Salient Features

1. Suitable for Round bottled medicine, food-stuff, cosmetic, etc. Packing into square box.

Technical Details:


PEW-LP-CRM
1. Mechanical Speed Maxi. 60 Cycles/min
2. Air consumption 40 L/Min at 6 kg/cm2/pressure
3. Carton size (mm) Mini. 20(L) x 15(W) x 60 (H)
Maxi. 82(L) x 82(B) x 205 (H)
4. Carton GSM 285 to 320 GSM
5. Power supply 220V A.C. 50/60Hz Single Phase
6. Powder consumption 0.6KW
7. Machine wt 400 kgs
8. Gross Wt 480 kgs
9. Machine Dimensions 1150L x 1500W x 1400 H


Copy Right © 2010 Prakash Engineering Works All Right Reserves Design By Aditya Infotech
Auto Coater, Rotocone Vacuum Dryer, Fluid Bed Dryer, Multi Mill, Vibro Sifter, Paste Kettle, Rapid Mixer Granulator, Fluid Bed Dryer, Cage Blender, Coating Pan, Auto Coater, IPC bin, Vacuum Transfer System, Mechanical Loader, Tipper, 'V' Blender, Octagonal Blender, Ribbon Blender, Double Cone Blender Dryers, Vertical Blender, Rotocone Vacuum Dryer, Vacuum Tray Dryer, Tray Dryer, Planetary Mixer, Ointment/cream Mfg. Plant,Contra Rotary Mixture, Pilot Ointment Plant, Homogenizer, Shampoo Mixer, Liquid Plant, Sparkler Filter, Reactor, Receiver, Heat Exchanger, Storage Tank, Autoclave Processor, Distillation Column, in Ankleshwar, Gujarat, India